Harmony Enterprises’ History

Harmony Enterprises’ History

Harmony Enterprises, Inc., locally known as HECO, was founded in 1962 by several local businessmen who had a vision to diversify the local economy.  They each invested and started operations in the basement of the local newspaper office in Harmony, Minnesota.  The purpose of the corporation was to establish an industry in the local community that relied heavily on its agricultural economic base.  After incorporation, shares of stock were sold to the local population.

On March 12, 1962 Wally Piehn, George Frogner, Archie Halvorson, Carl Lind, and Merlin Hoiness held the first Board of Directors meeting.  Wally Piehn was elected as the First President.  At this meeting, Merlin Hoiness also demonstrated a model of a portable shelter that could be used as a fishing shelter or beach cabana.

In October of 1962 a special directors meeting was held.  At this meeting Merlin Hoiness and Bill Peterson demonstrated another version of a portable shelter frame.  The directors hired Bill Peterson to prepare a working model of the shelter.

A community meeting was held in January 1963, in Harmony.  The people attending subscribed stock at a par value per share and a salesman was hired. Merlin Hoiness was elected President on March 12, 1963, and would serve in this position until April 1965.

In late August 1963, the Board discussed purchasing a building to start manufacturing.  Instead, the Board decided to rent the old Opera House, now the Legion Club, until they were in a better financial position to build a facility.  It was also decide to hire a manager and to register the trade name HECO.  Al Cremer was hired as manager.

By late March of 1964, a sales manager and five factory representatives were hired to cover the Midwest and sales territory east of Chicago.  The only products being marketed were the portable ice fishing shelters and the rather unique Bikini Walking Cane, which could be converted into a folding seat.

By this time, the rented manufacturing facility was becoming crowded.  Plans were made for construction of a new building on the north end of Harmony.  In April 1964, a group of business people organized the Harmony Development Corporation.  Its purpose was to borrow funds from the Small Business Administration, with the Harmony State Bank participating.  The funds were used to buy the land and erect a new building, which was sold to HECO on a twenty year land contract.

By July of 1964, the Board realized that the company could not support itself by manufacturing ice fishing shelters alone.  The product was too seasonal and the marketing area limited.  Other products were tried with limited success.

In January 1965, HECO made the first prototype canvas tent and roof lifting mechanism for a new style recreational vehicle called a “hard top fold down camping trailer”.  The canvas and roof lift mechanism was displayed on a camper manufactured by Travel Equipment Corp., at a RV trade show at Cobo Hall in Detroit.

Other camper manufactures were impressed by the quality of HECO’s products.  HECO received an order for 10 canvases. And by February the company had orders for 680 canvases and 520 sets of roof lift systems.  This was the turning point for HECO! And, in April of 1965, Al Cremer replaced Merlin Hoiness as President. In March 1968, Bill Peterson was elected Vice President, and also served as Chief Design Engineer until his retirement in 1988.

As the Company evolved, it became more involved in manufacturing canvas tents and roof lifting mechanisms, awnings, and add-a-rooms for the fold-down camper industry.  From 1965 through 1969, the Company grew rapidly.  Two additional buildings and a warehouse were constructed by the Harmony Development Corporation and sold to HECO on a land contract.

Don Cremer began his career with HECO in July of 1968 as Assistant Manager.  Don was named General Manager in 1969.  Following the death of his father (Al) in 1978, Don was promoted to President. By 1969, HECO saw the need to diversify.  The RV business was good, but very seasonal.  Employment would fluctuate from as many as 300 employees, on a three shift basis, during the peak season, to less than fifty during the slow season.

Harmony Enterprises’ history continued on, when, in 1969, they purchased General Polyflex Corporation, in Warren, Michigan (near Detroit).  The company name was later changed to General Polyflex, Inc. (GPI).  The new company manufactured polyurethane foam carpet padding.  The following year the economy in the Warren/Detroit area took a severe downturn.  For that reason, along with the difficulty in managing the company, it was decided to discontinue the operation.

Harmony Enterprises Manufacturers Balers And Compactors

The gasoline shortages in the early 1970’s had a negative impact on the recreational vehicle industry.  This in turn affected HECO’s sales. In 1971, another attempt was made to diversify.  A small company in Minneapolis was working with a supermarket chain, to develop a baler for baling used cardboard boxes.  Up until that time, the boxes were burned in an incinerator, which was harmful to the environment.  The company that was developing the hydraulic operated baler was looking for someone to do the manufacturing.  Harmony Enterprises recognized the future need for equipment to help protect the environment and agreed to manufacture the baler.

In 1972, they began manufacturing hydraulic balers under the GPI name, to meet the growing demand for retail, industrial and commercial businesses to handle and recycle corrugated cardboard.  The demand for balers grew, becoming a more popular method of handling cardboard than the previous method of incineration, which was declining due to environmental impact and legislative changes.  Balers are also utilized for baling aluminum cans, plastic containers and other recyclable materials.  GPI’s quality and branding color was immediately recognized, and the balers became a more central focus for the business and demand grew at a steady pace.

In 1987, the Company added a new product line of stationary compactors to augment its line of equipment.  The stationary compactors are designed to compact waste materials, reduce hauling costs and relieve landfill problems for municipalities and counties.

Increased product demand and the development of new models, created pressure on the manufacturing facility.  Therefore, in 1988 the Company began an expansion program.  First, a singular roof was constructed over two existing buildings to add an additional 1000 square feet of storage space.  The next part of the expansion was the erection of a 14,000 square foot building to increase the production area.  Existing offices were also remodeled and expanded.

In April 1988, Steve Cremer, grandson of Al Cremer, was hired as Chief Financial Officer of the Company.  Steve had previously been employed by a petroleum company in Houston, TX. In January of 1990, Steve Cremer was named as President and Don Cremer became CEO.  Both gentlemen continued to serve in these respective positions until 2004.

In 1993, GPI again reinforced its market leadership by offering the Indoor Power Packer.  This unique machine, constructed primarily of stainless steel, allows customers to compact and better manage their waste and recyclable materials at the source of the problem.  This meant that food service industries, hospitals, and hotels could compact their waste in the kitchen or other key areas, saving customers labor and time, making the compactor a key component of the business.

In 1995, Harmony Enterprises, Inc. consolidated its business focus and sold the canvas sewing operation.  The baler and compactor division was thriving, and was still very active in the roof lift system for the RV industry.  The Company went through the largest renovation in the Company’s history, and invested in new plant equipment, new offices and additional production area.  Sales of the GPI products were global, with units in over 25 countries worldwide.

Introduction Of The SmartPack

The Company introduced the Smart-Pack in 1998.  This machine is an automatic compacting receptacle, which replaces the traditional waste bin in dining areas of fast food restaurants.  The Smart-Pack features a “Smart Door”, which allows for a real no-touch opening of the waste deposit door.  Also, the Smart-Pack “talks” to restaurant patrons using a Promotional Programming System.  This system allows the restaurant to advertise menu items or entertain patrons with messages that play from the Smart-Pack.  These units are sold to restaurants, shopping malls, sporting venues, museums, airports, universities, theme parks, and medical facilities all over the world!

Harmony Enterprises went through a major transformation in 1998. The baler and compactor products began to be marketed under the Harmony Enterprises, Inc. name.  The GPI division name was discontinued.  Also, up until 1998, balers and compactors were sold to dealers and distributors worldwide.  The company started to sell direct to the end user, which lowered costs and helped to get the company’s name out there.  The internet was a large help in this transformation as the Harmony Enterprises “brand name” was growing. Don Cremer, CEO, retired in 2004, after 37 years with the company.

Also in 2004, the company hired a national sales manager to help increase its sales force.  Since then, 80% of sales are direct to the end user and Harmony Enterprises is known as a, “solution provider instead of an equipment manufacturer”. The company developed its first horizontal baler in 2005.  This HBCB05 was designed for the bottling industry.  The baler removes liquids from cans and bottles, and bales the material into marketable size bales to maximize the value of the recyclable material.

By 2010, sales in the HECO division consisted of less than 2% of the company’s revenue.  On December 1, 2010, the roof lift system business was sold to Camper and Recreation in Loyal, WI. In 2011, several additional large horizontal balers were added to our product line.  These balers can be used in bottling plants, distribution centers, scrap yards and recycling centers.

Today, nearly 70% of sales are domestic while the rest are international.

Balers comprise the majority of sales with 65% while compactors make up 15%.  The remaining 20% of sales consist of mostly parts sold to other companies or existing customers.

Internationally, Harmony Enterprises is becoming very well known in the world a provider of waste solutions.  The first international sale came in 1989 when Steve Cremer received a fax from a company in Taiwan who wanted to order a baler.  With some help from the Minnesota Trade Office, the sale was a success and the customer is still buying products from Harmony.  Presently, 30% of the company’s revenue is from internationals sales in 70 countries.

Harmony Enterprises’ History, Continued…

In April 2011, the company acquired a company in France to broaden international sales.  Cypress Environnement, located in Toulouse France is a sales and technical support organization selling equipment and providing servicing to the French market.  Mr. Jean-Marie Rosenzweig founded the company in 1997.  Cypress has sold over 1,000 balers in France since 1997. The staff consists of eight people.

In 2015 Harmony invested in an expanded indoor shipping area that allows for safer, climate controlled loading of our quality products.  And, in 2016, we facilitated the opening of Harmony Kids Learning Center, a progressive childcare center adjacent to our facility. Our employees, as well as the greater community, are able to benefit from affordable quality care close to their places of work.

The main production facility features over 95,200 square feet of production space, and we continue to add new products to the existing line.  This includes wireless monitoring options, as well as products designed to fill need gaps in the waste handling and recycling industries.

An example of this is our ExtractPack Pro Liquid Extraction Baler that combines the operational space and efficiencies of an automatic conveyor fed vertical baler with the perforation and draining system of a horizontal baler, at a cost more in line with industry demand. Another are our innovative Hand Sanitizer Stands that meet the need to keep employees and customers safe as automatic, no-touch options in a virus resilient world.

Harmony Enterprises is staffed with a tremendously talented and loyal workforce, and is one of the largest employers in the area.  The company has invested heavily in the future, to position itself for continued long-term growth. Our Core Purpose has always been career, community, & culture and our actions are rooted in our core values.

In October of 2020, Harmony Enterprises was honored to be named a Family Owned Manufacturer Of The Year by the Minneapolis-St. Paul Business Journal.  This incredible award is a testament to all of those who have played a role in the past, present, and future of our company.

Looking To The Future – Building On The Past

Knowing Harmony Enterprises’ history and where we have been will help to guide us into the future.  Harmony Enterprises is thankful for our employees and their families, our customers, vendors, and community. Without all of their support, we could not achieve the success we have in the past and look forward to in the future.

If you would like to stay up-to-date with what’s happening at Harmony, follow us on Facebook, Twitter, Instagram, and Linkedin, and subscribe to our free monthly eNewsletter here.